The RUCKUS ICX router must establish organization-defined alternate communications paths for system operations organizational command and control.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
| V-273671 | RCKS-RTR-001080 | SV-273671r1110957_rule | Medium |
| Description |
| An incident, whether adversarial- or nonadversarial-based, can disrupt established communications paths used for system operations and organizational command and control. Alternate communications paths reduce the risk of all communications paths being affected by the same incident. To compound the problem, the inability of organizational officials to obtain timely information about disruptions or to provide timely direction to operational elements after a communications path incident, can impact the ability of the organization to respond to such incidents in a timely manner. Establishing alternate communications paths for command and control purposes, including designating alternative decision makers if primary decision makers are unavailable and establishing the extent and limitations of their actions, can greatly facilitate the organization's ability to continue to operate and take appropriate actions during an incident. |
| STIG | Date |
| RUCKUS ICX Router Security Technical Implementation Guide | 2025-06-03 |
Details
| Check Text (C-77762r1110033_chk) |
| Verify the router is configured to establish organization-defined alternate communications paths for system operations organizational command and control. If the router is not configured to establish organization-defined alternate communications paths for system operations organizational command and control, this is a finding. |
| Fix Text (F-77667r1110034_fix) |
| Configure the router to establish organization-defined alternate communications paths for system operations organizational command and control. Configure VLANs separate organization-defined traffic: device# configure terminal device(config)# vlan 235 name mgmt-vlan device(config-vlan-235)# tag ethernet 1/x/x device(config-vlan-235)# interface ve 235 device(config-vif-235)# ip addr x.x.x.x/x device(config-vif-235)# vlan 200 name ops-vlan device(config-vlan-200)# tag ethernet 1/x/x device(config-vlan-200)# interface ve 200 device(config-vif-200)# ip addr x.x.x.x/x device(config-vif-200)# vlan 210 name user-vlan device(config-vlan-210)# tag ethernet 1/x/x device(config-vlan-210)# interface ve 210 device(config-vif-210)# ip addr x.x.x.x/x device(config-vif-210)#end device# write memory |