The layer 2 switch must have all trunk links enabled statically.
Overview
Finding ID
Version
Rule ID
IA Controls
Severity
V-206665
SRG-NET-000512-L2S-000005
SV-206665r385561_rule
Medium
Description
When trunk negotiation is enabled via Dynamic Trunk Protocol (DTP), considerable time can be spent negotiating trunk settings (802.1q or ISL) when a node or interface is restored. While this negotiation is happening, traffic is dropped because the link is up from a layer 2 perspective. Packet loss can be eliminated by setting the interface statically to trunk mode, thereby avoiding dynamic trunk protocol negotiation and significantly reducing any outage when restoring a failed link or switch.
Review the switch configuration to verify that trunk negotiation is disabled by statically configuring all trunk links. Configuring a command to manually disable negotiation may also be required for some switch platforms.
If trunk negotiation is enabled on any interface, this is a finding.
Fix Text (F-6923r298426_fix)
Configure the switch to enable trunk links statically.